The EGLK19264-7T is an external 192x64 Intelligent Graphic LCD display in a metal or ABS enclosure. Engineered to quickly and easily add an elegant graphic HMI to any application. Multiple communication protocols such as Serial RS232, TTL, I2C, USB and RS422 communication models allow the EGLK19264-7T Graphic LCD to be connected to a wide variety of host controllers.
Our Graphic LCD provides you with a cost-effective industrial HMI user interface solution for that great product/project you are developing. On board memory for Fonts and Bitmaps! This graphic LCD displays graphics and text in any font, style, justification and language, all with the convenience of a 7 key backlit tactile keypad will allow fast development for any application.
External 192x64 Graphic LCD Display 1U HMI
ABS Plastic external enclosure with screw mounting
Metal external enclosure with mounting brackets
Available Interfaces: Serial RS232, TTL, I2C, and USB
7 key backlit tactile keypad
256KB of customizable fonts and bitmaps to enhance the graphical user experience
Programmable to display any language
3 dual colour indication status LEDs
Three available voltage options: low power 3.3V, 5V, and Industrial 9-35V (12V, 24V)
Field upgradable firmware
Piezo Buzzer to provide audio feedback
Software controlled contrast and brightness with configurable time-out setting up to 90 minutes
Built in Horizontal or Vertical bar graphs
Extended temperature available for extreme environments of -20C to 70C
Hardware flow control
Fast and easy development
Designed, supported and Made in CANADA
Long life cycle
Backed by Matrix Orbital's decades of research and development
NOTE: The RS232/I2C/TTL versions do not come with a communication/power cable. Please review the technical manual for the communication/power connector pinout.
\"Recta\" is a fairly small proportional font. At 11x11 pixels, it is about as small as you can make a font and still have proper looking characters - especially lower case characters with \"decenders\" like \'j\' and \'g\'. The font is clean and readable and allows about 40 characters per line and 5 lines on a 240x64 display. Set font metrics to: character spacing = 1; line spacing = 1; left margin = 0; right margin = 0
\"Lucida Mono\" is a 10 x 15 pixel monospaced font. It allows 21 characters per line and 4 lines on a 240 x 64 pixel display. Set font metrics to: character spacing = 1; line spacing = 1; left margin = 5; right margin = 0
\"Clean\" is a very small, but still remarkably readable proportional font designed by William Ferrell of LCDproc fame. Depending on the specific characters printed, this font allows approximately 59 characters across the screen and 9 lines of text (GLK24064-25). Set font metrics to: character spacing = 1; line spacing = 1; left margin = 0; right margin = 0
\"Small\" is the 5 x 7 pixel monospaced font. It allows 40 characters per line and 8 lines of text on a 240 x 64 pixel display. Set font metrics to: character spacing = 1; line spacing = 1; left margin = 1; right margin = 0
\"Small Filled Spanish\" is the 6 x 7 pixel monospaced font which is has Spanish characters. It allows 40 characters per line and 8 lines of text on a 240 x 64 pixel display. Set font metrics to: character spacing = 0; line spacing = 1; left margin = 0; right margin =
\"Small Inversed Filled\" is the 6 x 7 pixel monospaced font. It allows 40 characters per line and 8 lines of text on a 240 x 64 pixel display or 4x20 on a 122x32 pixel display. Set font metrics to: character spacing = 0; line spacing = 0; left margin = 0; right margin = 0
\"Futura\" is the 14 pixel high proportional font which is loaded as font 2 at the factory. Depending on the specific characters printed, this font allows approximately 35 characters across the screen and 4 lines of text. Set font metrics to: character spacing = 1; line spacing = 0; left margin = 0; right margin = 0
\"Small Filled\" is the 6 x 7 pixel monospaced font which is loaded as font 1 at the factory. It allows 40 characters per line and 8 lines of text on a 240 x 64 pixel display. Set font metrics to: character spacing = 0; line spacing = 1; left margin = 0; right margin = 0
This updated program is the new tool kit for all our graphic displays. It lets you upload fonts and bitmaps, set fonts and font metrics. As well, allows you test all the different features of the display. In addition this program allows you to create new fonts from existing fonts in your windows library. As well as convert graphic files, to a format that you can upload to the displays. This version supports all revisions of most graphic displays, including the following:
When installing on Windows we recommend installing to a folder other than \"Program Files\". Doing so will avoid any Administrative Permission errors. *For example installing MOGD# to the desktop will avoid any of these errors.
Update: 1.1.8 4-Nov-2015-
Added support for one byte file IDs
Improved font optimization
Update: 1.1.7 26-Jan-2015-
Added monospacing and optimization for fonts
Update: 1.1.6 30-Jun-2014-
Added animation support
Added support for firmware revision 8.5 commands
Update: 1.1.5 31-Jan-2013
Extended language support for fonts
Code page can now be specified when generating a font